XQ-6451W Wheelchair Vehicle Static Strength Testing Machine
I. Application scope of the wheelchair vehicle static strength testing machine：
This testing machine is used to conduct comprehensive durability tests on different parts of a wheelchair under various forces, simulating the usage of a wheelchair by humans. It is suitable for manufacturers and quality inspection departments to conduct tests on wheelchair and mobility vehicle products. This machine features a full Chinese display on a liquid crystal screen, which is easy to use. All adjustments are made through a numerical control system, including force, speed, frequency, upward or downward direction testing, etc.
II. Main parameters of the wheelchair vehicle static strength testing machine:
1.Control interface: Color touch screen, multi-station independent control type.
2. Load cells: 2 sets, 3000N each, 2 sets independently controlled
3. Force Display: Touch screen digital display for setting, dual force display.
4. Force unit: LB, N, KG can be freely converted among each other.
5. Counting device: 0 - 999999 times
6. The load and time can be set arbitrarily.
7. Set-off time: Can be set from 1 second to 99 hours and 99 seconds arbitrarily.
8. Testing method: Continuous loop type or single-stage type
III. Advantages of the wheelchair vehicle static strength testing machine：
1.This machine is operated by a microcomputer.
2. The hardware is equipped with precision components, PLC (Programmable Logic Controller), and microcomputer control.
3. High precision, low noise, long lifespan, and easy operation.
4. The settings are convenient, precise and simple.
IV. Structure of the Static Strength Testing Machine for Wheelchairs：
1. The machinery is of a frame-type structure.
2. The force value display is achieved through the output of a precise S-type sensor.
3. The controller is of microcomputer type.
V. Operating Procedures for the Static Strength Testing Machine for Wheelchairs：
1.Before conducting the test, please make sure that the power supply or gas source is properly plugged in or connected.
2. Before conducting the test, make sure that the product is properly installed and fixed.
3. The mechanical transmission parts must be maintained regularly.
4. After the test is completed, it is necessary to ensure that the power supply has been turned off.
5. It is strictly prohibited to use auxiliary corrosive liquids to clean the machine. Instead, rust preventive oil must be used.
6. This testing machine must be used exclusively by one person. During the testing process, it is strictly prohibited to strike the machine or have anyone stand near it.
7. The machinery must be grounded.