XQ-1888 Baby Carriage Braking Performance Testing Machine 
1. Application scope of the stroller braking performance testing machine：
It is manufactured in accordance with the CNS manual push stroller performance standards. The testing method is to place a model baby in the stroller platform, then place the stroller platform on a test bench with approximately 60 grit sand. Adjust the inclination angle of the test bench until 30 seconds have elapsed, and visually check if the stroller platform slides. 
II. Test standards for baby car seat braking performance testing machine： 
The design standards are based on CNS, ENL1888:2003, and AS/NES2088:2000. They can meet the requirements of the product testing standards. 
III. Main parameters of the baby stroller braking performance testing machine：
1. Inclination angle of the testing platform: 0° - 15°
2. Surface of the testing platform: covered with 60-grit sandpaper
3. Area of the testing platform: 120cm × 160cm
4. Machine dimensions: (L × W × H) 130 × 170 × 100cm
5. Adjustment method: manual adjustment 
IV. Advantages of the stroller braking performance testing machine： 
1.This testing machine is lightweight and easy to operate. 
2. The testing angle can be adjusted easily. 
3. The surface of the test bench is convenient for replacing the sandpaper. 
V. Structure of the baby carriage braking performance testing machine：
This testing machine adopts a frame structure. Its surface is treated with high-temperature resistant enamel paint. The adjustment control uses manual adjustment method, which is easy to operate and ensures accurate testing. 
VI. Operating Procedures for the Baby Carriage Braking Performance Testing Machine：
1. First, install the test sandpaper on the test platform. 
2. Adjust the test angle according to the standards and secure the mechanism. 
3. The test vehicle is placed in the test area for testing. 
VII. Notes for the Baby Carriage Braking Performance Testing Machine：
1.Before conducting the brake performance test, please ensure that the angle is properly adjusted and locked. 
2. The braking performance testing machine ensures that the bracket is free from issues such as loose screws. If any looseness is detected, it must be tightened before the test. 
3. When conducting the brake performance test, it is strictly prohibited to press the brake pedal with your hands or have anyone standing nearby. 
4. The mechanical transmission parts must be maintained regularly and lubricating oil should be added. 
5. After the test is completed, the machine must be reset manually. 
6. The test machine for braking performance must not be wiped with any corrosive liquids. Instead, rust-proof oil should be used.