XQ-2265 Front Fork Dynamic Fatigue Testing Machine
I. Equipment Introduction：
The front fork component is located at the front part of the bicycle structure. Its upper end is connected to the handlebar component, the frame component is matched with the front tube, and the lower end is matched with the front axle component, forming the steering system of the bicycle.
Turning the handlebars and the front fork can make the front wheel change direction, thus playing the role of guiding the bicycle. In addition, it can also control the movement of the bicycle. The force conditions of the front fork components are of the beam suspension type, so the front fork components must have sufficient strength and other properties.
II. Technical Specifications： 
1.Test station: 1 workstation
2. Control method: Touch screen
3. Power source: Servo electric cylinder + Servo motor
4. Test load range: 200kg
5. Force accuracy of the testing machine: 0.5%
6. Test range: 0 - 100mm
7. Testing methods: one-way and two-way
8. Horizontal starting point adjustment: 0 - 200mm
9. Adjustable starting point for vertical load: 0 - 200mm
10. Displacement accuracy: 0.001mm
11. Testing speed: 1 - 1000 mm/min
12. Fork tester fixture: 1 set
13. Equipment power: 1000W
14. Dimensions of the equipment outside: approximately 560*450*1200mm
15. Equipment weight approximately: 200 kg
16. Equipment power supply: 220V 50HZ