XQ-X204 Floor Wheel Brake Pad Testing Machine 
I. Application Scope of Brake Pad Testing Machine: 
It is mainly used to test the durability of the braking spring clips for medical foot wheels, swivel wheels and various types of wheels with brakes. Through reciprocating braking, the fatigue strength of the spring clips is determined. Starjoy rubber wheel brake pad testing machine manufacturer - brake angle wheel testing direct sales.
II. Main parameters of the brake pad testing machine:
1.Counter: The range can be set from 0 to 666666.
2. The electric cylinder type design structure enables adjustment of position and angle according to different products, and it is both cost-effective and practical.
3. Travel of the actuating mechanism: Adjustable within the range of 50 - 120 meters or as specified by the customer's sample.
4. Brake pad force: Adjustable within 10 kg.
5. Speed: Adjustable from 10 to 30 times per minute.
6. Product clamping and positioning pin: 100mm height available.
7. Product fixture: Customized according to the sample.
8. Power brake source: The angle and front-back position can be adjusted to facilitate testing of different products.
9. Wheel installation dimensions: As per the customer's sample specifications.
10. Voltage: 220V, 50Hz.
11. Control method: Instrument type. It can be controlled by any one fixture or all fixtures can be activated simultaneously.
12. Speed control: Timing control.
13. The braking force can be adjusted.
14. Power: 150W
15. Mechanical weight: Approximately 120 kilograms
Xingqiao Rubber Wheel Brake Pad Testing Machine Manufacturer - Direct Sales of Brake Wheel Testers.
III. Advantages of the Brake Pad Testing Machine:
1.The outer box of the main unit is made through a sophisticated and high-temperature resistant paint coating process.
2. Horizontal loading design.
3. Cylinder test operation.
4. The control strength of the pressure valve.
5. The timer's digital display controls the speed, and the actual speed is directly shown.
6. To ensure the durability of the brake spring sheets of different sizes, the fatigue strength of the spring sheets can be determined through reciprocating braking.
IV. Structure of the Brake Pad Testing Machine:
1.The outer box of the main unit is made through a sophisticated and high-temperature resistant paint coating process.
2. The operating principle employs precision cylinders.
3. The count is controlled by the instrument counter, and the speed is regulated by the speed control device.
V. Operating Method of Brake Pad Testing Machine:
1.Place the brake wheels on the testing platform and adjust the position of any 1.clamping fixtures according to the shapes of the different casters.
2. After placing the casters in position, secure the sample with a fixture.
3. Set the required test values and speeds.
4. The device can be tested when powered on.
VI. Notes for Brake Pad Testing Machine:
1.Before powering on the brake pad testing machine, the machinery must be grounded.
2. Before conducting the test, make sure that the product and fixtures are properly installed.
3. The brake pad testing machine must be used exclusively by one person.
4. After the test is completed, release the pressure on the sample and cut off the power supply.
5. Xingqiao Rubber Wheel Brake Pad Testing Machine Manufacturer - Direct Sales of Brake Wheel Testers