XQ-81500 Tire Mounting Machine 
I. Application scope of the tire mounting machine：
This tire molding machine is suitable for 6", 8", 10", 12", and 14" tires, such as skateboard tires, baby car tires, airless tires and foamed tires. It replaces manual tire molding by operators to increase the molding efficiency. It is the most economical and convenient tire molding machine available in the current market. 
II. Main parameters of the tire mounting machine：
1.Filling station: One group 
2. Conical copper: 1 set (with 8-10 different ring sizes) 
3. Guide tube: 1 set (8-10 inches universal) 
4. Rack: 1 set (including upper and lower plates, pressure plate, and middle plate) 
5. Control method: Electrical combined control + Manual operation by personnel 
III. Operating Procedures for Tire Pressing Machine： 
1. First, fix the product onto the testing fixture. 
2. After fixing the product. 
3. The machine is powered on, the required test values are set, and the machine then conducts the test. 
4. Once the test value is reached, the machine will automatically stop, and the test result will be displayed clearly. 
IV. Precautions for the Tire Pressing Machine： 
1.Before conducting the test, please make sure that the power supply is properly plugged in or connected. 
2. Before conducting the test, make sure that the product is properly installed and fixed. 
3. The mechanical transmission parts must be maintained regularly. 
4. After the test is completed, it is necessary to ensure that the power supply has been turned off. 
5. It is strictly prohibited to use auxiliary corrosive liquids to wipe the machine. Instead, rust-preventing oil must be used. 
6. This testing machine must be used exclusively by one person. During the testing process, it is strictly prohibited to strike the machine or have anyone stand near it. 
7. The machinery must be grounded.